Simple catch to keep cabinetry doors closed. Elbow catches are ideal for over lapping double door cabinets and doors that feature a finger hole to open. These Perko spring loaded catches require minimal pressure to close, but will keep the door locked until released with the lever. The highly…
OffsetChrome plated zinc alloyPin Height: 1-1/2" by 2-1/2" open widthEach hinge requires five #8 screwsSold in pairs
Chrome-plated zinc with plastic insert and brass stem. Black plastic insert. Knob O.D.: 1 1/2''. Max panel thickness: 1 1/8''.
Each hinge requires five #8 fastenersSold in pairsChrome plated zinc alloy or chrome plated bronze 1213DP1: Chrome plated zinc alloy Pin Height: 1-1/2" by 2-1/2" open width 0987CP1: Chrome plated bronze Pin Height: 1-1/2" by 2-1/4" open width
Simple design that works incredibly well. If youre shopping for a window stop, there is a good chance you are replacing one that has worn out. This simple Perko design has been used for decades and there is an excellent chance the screw holes are the same. Designed to be installed on the sill…
Chrome-plated zinc. Base: 1-1/8"W. Hook projects 1-3/8". Require #6 fasteners (not included). Made in U.S.A.
Classic looking catch for cabinetry doors. These Perko catches allow users to push shut doors and know they will remain closed in heavy chop or rough seas. A contoured level releases the catch and serves as a handle to pull the door open. Ideal for partially inset doors or doors with a partial…
Stainless steel clip. Chrome Plated Zinc Alloy Arrow. Clip base: 1 3/8" x 7/16" Arrow base: 1 5/8" x 3/4" Projection: 1 3/4" Requires #8 fasteners
Chrome-plated bronze. Rubber bumper. Length: 2 3/8"Base O.D.: 1 15/16''. Requires #6 screws for keeper, #8 for stop
Chrome-plated bronze. Rubber bumper. Length: 3 1/4" Base O.D.: 1 15/16''. Requires #6 screws for keeper, #8 for stop
Chrome-plated brass with stainless steel fastener. 1" OD. For doors up to 1 1/8" thick. Made in U.S.A.
Designed to be mounted through surfaces from 1/8 inch to 3/4 inches thick. The cam bars are adjustable to a maximum of 3 inches from the mounting surface.
Designed to be mounted through surfaces from 1/8 inch to 3/4 inches thick. The cam bars are adjustable to a maximum of 3 inches from the mounting surface.
Spare offset old style square shaft cam bar for your surface mount lock & latch set. 109100599A fits both threaded and square shaft lock sets.
Extra Long Threaded Straight Cam Bar for lock/latch.
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting.Bevel/Strike Type: Regular w/BoxCase Dimensions: 2-1/8 x 1-3/4 Escutcheon Dimensions: 2 x 2-1/4"
Flush Cup Rim Latch Set for eoor thickness 3/4inches to 1-1/8 inches. Supplied with Black Polymer Spacer for Surface Mounting. Chrome Plated Zinc Alloy Sliding Lock Button Reverse Bevel with Flush Strike Dimensions Case : 2-1/8" x 1-3/4" Dimensions Escutcheon: 2" x 2-1/4" Cup Screw Size: #8 Case…
Compact flush latch for thin hatches and lockers Keeping lockers and hatches closed is a little easier with a Perko Flush latch—even if the locker door is only 1/2" thick. These stylistic locking latches provide a way to keep lockers closed in rough seas or heavy chop and install quickly in…
Flush Mounts in a 2-3/8 x 2-3/8 Inch HoleSurface Mounts in a 1-5/8 Inch Diameter Hole with Polymer Spacer IncludedFor Door Thickness 1/8 to 3/4 Inch Black or White Polymer Chrome Plated Zinc Alloy Stainless Steel Stem and Lock Nut Large Handle Allows Two Finger Grip
Flush Mounts in a 2-3/8 x 2-3/8 Inch HoleSurface Mounts in a 1-5/8 Inch Diameter Hole with Polymer Spacer IncludedFor Door Thickness 1/8 to 3/4 Inch Black or White Polymer Chrome Plated Zinc Alloy Stainless Steel Stem and Lock Nut Large Handle Allows Two Finger Grip