Compact lifting rings for small hatches and lift-outs. These popular flush mounted lifting rings are widely used throughout the marine industry—most boats have several installed when they leave the factory. The small foot print and shallow depth make Perko lifting rings ideal for cabinetry…
Easily installs without mortising.Pin Height: 3-3/8" by 7/8" closed widthEach hinge requires four #8 fastenersSold in pairs Stainless steel or chrome plated stamped brass 0957DP0STS: Stainless steel 0957DP0CHR: Chrome plated stamped brass
Stainless-steel butt hinge with removable pin.Pin Height: 2-1/2" Open Width: 2" Each hinge requires six #8 fastenersSold in pairs
Straight Cam Bar : 093100399A for flush Lock
For surface mount lock & latch
Strike Plate - Perko
This model of Perko's Surface Mount Flush Latch #1092 comes in white plastic with an extra long offset cam bar. It easily installs in a 2-1/2" diameter hole and is for mounting surfaces 1/8" to 3/4" thick.
This model of Perko's Surface Mount Flush Latch #1092 comes in white plastic with a straight cam bar. It easily installs in a 2-1/2" diameter hole and is for mounting surfaces 1/8" to 3/4" thick.
Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick The T - Handle drops down flush in either the open or closed (180 Rotation) position. (except with the offset cam bar positioned upward) The rubber seal & boot under the T - Handle seals the lock cylinder…
Surface Mount Lock & Latch for Smooth and Carpeted SurfacesEasily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick. The T - Handle drops down flush in either the open or closed (180 Rotation) position. (except with the offset cam bar positioned upward). The…
Surface Mount Lock & Latch for Smooth and Carpeted SurfacesEasily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick. The T - Handle drops down flush in either the open or closed (180 Rotation) position. (except with the offset cam bar positioned upward). The…
Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick The T - Handle drops down flush in either the open or closed (180 Rotation) position. (except with the offset cam bar positioned upward) The rubber seal & boot under the T - Handle seals the lock cylinder…
Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick The T - Handle drops down flush in either the open or closed (180 Rotation) position. (except with the offset cam bar positioned upward) The rubber seal & boot under the T - Handle seals the lock cylinder…
Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick The T - Handle drops down flush in either the open or closed (180 Rotation) position. (except with the offset cam bar positioned upward) The rubber seal & boot under the T - Handle seals the lock cylinder…
Compact locking flush latch ideal for carpeted surfaces Keeping lockers closed is a little easier with a Perko surface mounted latch—even if the locker door is only 1/8" thick. Ideal for carpeted surfaces, but can be used on any surface, these stylistic round latches install quickly in a 2…
Chrome-plated brass, black plastic knob and stainless steel stud. Dimensions: 1 3/8'' x 1'' Requires #8 screws Sold individually.
Chrome Plated Zinc Alloy. Sliding Lock Button Door thickness: 1" to 1 3/8" Escutcheon dimensions: 4 3"/8 x 1 1/4" Tube OD: 3/4" Requires #6 fasteners
Wall Plate For 0159 Bell, plain bronze or brass finish.
White Fiber Reinforced Plastic Hinged, Water Resistant
White Fiber Reinforced Plastic Hinged, Water Resistant